ENRIC WATERPROOF is high quality acrylic water-based emulsion paint formulated to withstand Vietnamese climate. It performs excellent alkaline and efflorescent resistance, smooth finish, better adhesion, water proof, recommended for exterior masonry surface painting system.
Component
Water, pigments, acrylic polymer, additives (without lead and mercury).
Performance specification:
- Film appearance: Smoothing
- Excellent alkaline resistance
- Excellent efflorescent resistance.
- Coverage: 12-14 m2/lit/coat approx.
APPLICATION METHOD
- Stir well before use.
- Tools: brush, roller or spray gun.
- Tools must be cleaned before use.
- Store in a cool, shaded and well ventilated place.
- Container must be in a secure, upright position and be tightly closed.
- Use immediately after opening can.
CONDITIONS OF APPLICATION
Average temperature not over 30oC, relative humidity not over 80%
Do not apply in condition under 100oC
Ensure the surface to be painted is clean, dry, free from dirt, oil or other contamination.
Must remove all loose or defective paint or powder residue and fungus or algae.
Treat cracking on masonry before application.
Dilution: not over 10% (by volume) with clean water. Over-dilution may reduce the quality of the paint film
RECOMMENDED PAINT SYSTEM
| Premium putty: ENRIC WITHOUT SANDING or ENRIC 2 IN 1 | 02 coats |
| Premium primer: ENRIC NANO SEALER EXTERIOR | 01-02 coats |
| Premium Exterior Coating: ENRIC WATERPROOF | 02 coats |
1/ Keep out of reach of children.
2/ Do not directly contact with skin. Use soap and water to remove splashes of paint from skin.
3/ Eye protection is recommended. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.
4/ Use only in well ventilated areas, do not breath vapor/spray, wear suitable personal protective equipment.
5/ Do not empty into drains or water sources.
